)NGXMOTM6XKIG[ZOUTY
01. When using the machine for the first time, please let the machine run out of power.
02. Please charge the machine for 12 hours for the first time. When the machine is charging, the
recharge button will flash. When the charging is completed, the control button light will be on.
03. If you do not use the machine for a long time, please press and hold the power button to turn
off the sweeper.
04. After the power is used up, please recharge the machine as soon as possible.
05. This product can only use the charging base station equipped with the factory.
06. The battery will be repaired and replaced by the after-sales department.
Base station touch buttons and display
Click the base station self-cleaning button. (If the sweeper is in the base station, it will exit the
base station about 50cm to enter the waiting command mode.) The base station will add water to
the cleaning tank for self-cleaning, and will automatically drain the sewage after cleaning. After the
start of self-cleaning, every time you click the self-cleaning button, the base station will switch
between "add water to the cleaning tank" and "drain the sewage" once.
(If the sweeper does not operate in 10 minutes while waiting for command mode, the machine will
enter sleep mode.)
Click on the sweeper to start cleaning, and click on the sweeper again during the cleaning
process to pause cleaning
Tap the sweeper to return to the base station for charging in any mode. Click again in the
process of returning to the base station, the machine will suspend recharging and enter the waiting
command mode.
Press and hold at the same time to turn off the child lock. All buttons on the sweeper and
base station are locked. APP control is not affected. Press and hold again at the same time to turn
off the child lock.When the child lock is turned on, all buttons on the sweeper and base station are
locked. APP control is not affected. Long press again
/TYZX[IZOUTYLUX[YK
࠳֨ҭऄИ
是
非
成败转
头
空
)NGXMOTM
Содержание X580
Страница 2: ......