INSERTING THE FRONT WHEEL - ROCKSHOX PIKE
b
Remove the pad spacer from the front brake caliper.
Store the spacer in a secure location as it can be used to prevent the brakes engaging
and pushing the brake pads out when transporting the bike without its wheels.
c
Remove the front axle by opening the quick release lever and unscrewing it.
d
Now insert the front wheel in the fork dropouts.
Ensure that the hub is sitting correctly in the dropouts.
Ensure that the brake rotor in sits between the brake pads.
Now the front axle can be inserted.
e
Slide the lightly greased axle through the hub until the thread
in the dropout end engages the opposite dropout and tighten the axle.
Do not use any tools to increase the leverage.
Close the lever by hand so that it is parallel to the stanchions.
b
d
e
c
eng
