YSI MultiLab 4010P-1W, Руководство по эксплуатации

Страница: 66 / 114

Settings MultiLab 4010-1W
66
ba76141e07 08/2018
* Brand names or trade names are trademarks of their respective owners protected
by law.
9.1.3 Calibration interval
The calibration evaluation is displayed as a sensor symbol.
After the QSC function has been enabled the sensor symbol is replaced by the
QSC scale (see section 5.2.9 QSC
FUNCTION
(
SENSOR QUALITY CONTROL
), page
38).
After the specified calibration interval has expired the sensor symbol or the
QSC scale flashes. It is still possible to measure.
Setting the calibra-
tion interval
The calibration interval is set to 7 days in the factory.
You can change the interval (1 ... 999 days):
22 Reagecon 20 * 2.000
4.000
7.000
10.000
13.000 20°C
23 Reagecon 25 * 2.000
4.000
7.000
10.000
13.000 25 °C
24 Chemsolute * 2.000
4.000
7.000
10.000 20°C
25 USABlueBook * 4.000
7.000
10.000 25 °C
The buffers are selected in the menu, pH /
<ENTER>
/ Calibration
/ Buffer (see section 9.1.1 S
ETTINGS FOR P
H
MEASUREMENTS
, page
63).
To ensure the high measuring accuracy of the measuring system,
calibrate after the calibration interval has expired.
No. Buffer set * pH values at
1. Open the menu for measurement settings with
<ENTER>
.
2. In the Calibration / Calibration interval menu, set the calibration interval
with
<

><

>
.