YSI 95 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 36

YSI 95 Скачать руководство пользователя страница 15

Operation

Section 4

YSI Incorporated

Model 95

11

4.8

4.8

4.8

4.8 TOGGLING BETWEEN %-AIR SATURATION AND MG/L

TOGGLING BETWEEN %-AIR SATURATION AND MG/L

TOGGLING BETWEEN %-AIR SATURATION AND MG/L

TOGGLING BETWEEN %-AIR SATURATION AND MG/L

The

UP ARROW

key allows quick and convenient switching between the two DO parameters

without going through the instrument’s four modes (using the MODE key). Press the

UP ARROW

key to toggle the DO reading between %-air saturation and mg/L.

4.9

4.9

4.9

4.9 DISSOLVED OXYGEN FILTER

DISSOLVED OXYGEN FILTER

DISSOLVED OXYGEN FILTER

DISSOLVED OXYGEN FILTER

The Model 95 is equipped with a DO filter to help filter out instability and high frequency noise.
This feature is useful when measuring dissolved oxygen in an unstable environment such as a fast
moving stream or an aeration tank. The default option for the filter is off. To activate the filter, enter
the filter option menu by pressing both the

DOWN ARROW

and

MODE

keys together (

Ú

key

slightly ahead). Operation procedures:

•

Press both the

DOWN ARROW

and

MODE

keys

together (

Ú

Ú

Ú

Ú

key slightly ahead). The current status

of the filter is displayed,

On

or

OFF

, with a smaller

“

FIL

” displayed in the bottom right corner of the

screen.

•

Press the

UP ARROW

or

DOWN ARROW

key to

change the current status of the filter option.

•

Press

ENTER

to confirm the change.

•

To abort any changes and exit the filter menu, press
the

MODE

key (instead of

ENTER

).

4.10

4.10

4.10

4.10 DISPLAY BACKLIGHT

DISPLAY BACKLIGHT

DISPLAY BACKLIGHT

DISPLAY BACKLIGHT

At times it may be necessary to take measurements with the Model 95 in dark or poorly lit areas. To
help in this situation, the Model 95 comes equipped with a backlight that will illuminate the display
so that it can be easily read. To activate the backlight, press and hold the

LIGHT

button. The

display will remain lit as long as the button is depressed. When you let it up, the light goes out to
preserve battery life.

On

FIL

«
...
13
14
15
16
17
...
»

Содержание 95





































Отзывы:

Нет отзывов