manualshive.com logo in svg

YSI 1500 Sport, Руководство пользователя, Страница: 16 / 134

Поделиться
Скачать
YSI 1500 Sport Скачать руководство пользователя страница 16

 

 

3

3

3

3----6

6

6

6  

3.4 Membrane Installation 

The starter kit contains a pack of four YSI 2329 lactate membranes. 

 

Figure 

Figure 

Figure 

Figure 3

3

3

3....4

4

4

4 Enzyme Membrane Installation

 Enzyme Membrane Installation

 Enzyme Membrane Installation

 Enzyme Membrane Installation    

 

To install a membrane, first unscrew the probe retainer and pull out the probe. 
Remove the membrane assembly that's on it. You can use a toothpick or pointed 
tool to unseat the old membrane. Be careful not to scratch the probe face. Open 
one compartment of the plastic membrane pack and rinse the membrane inside 
with a few drops of salt solution (YSI 2392 is provided in the 1504 starter kit). 
Place one drop of salt solution on the probe face. Then, using the plastic 
membrane pack as an applicator, press the O-ring membrane assembly gently 
onto the probe face (Figure 3.4). Be sure the membrane is seated on the probe 
face. The top of the O-ring will be flush with the shoulder. Wipe excess salt 
solution from the probe body, then return the probe to the sample chamber. 
Finger tighten the probe retainer so that the O-ring makes the necessary seal. 
Return the membrane holder to the foil pouch and refrigerate it. Note the 
expiration date on the membrane package. We recommend that you keep a 
logbook in which the dates and lot numbers of reagents are recorded, along with 
data from daily operational checks and other relevant information. 

3.5 Power 

If the SPORT is being powered up for the first time or it has been unused for 
some period of time, the first thing you should do is connect the battery charger.  

 CAUTION: Make sure the SPORT power is turned off 

before plugging in the battery charger. 

 

Содержание 1500 Sport







































































































































Отзывы:

Нет отзывов