1
）
To adjust the image: Use mouse to click the slide block and set, or click the slide block
and then roll the mouse to get the set.
2
）
To add horizontal line and vertical line: Set the number of lines and press “ok” key, then
you will see the lines as you set. Put the mouse to any line, mouse arrowhead will change
to hand form then you can move this line to deserved position. Adjust the line slightly with
mouse roller.
Put the mouse to any line and press right key to adjust the line attribute, it will show
the set window to adjust the line color, thickness.
Each line is with its unique coordinate position, you can calculate and set the distance
between two lines.
Central cross curve set: Press this button and it will show the set window, you can
change the cross curve thickness and color.
Auto exposure set
：
Press this button and adjust the current brightness. Select the
lower left quarter block to get the auto exposure.
White balance set
：
Put a white paper or abject under the lens, press WB button,
camera will adjust RGB automatically under your lighting environment to make the color close to
white.
Select the lower left quarter block to get the auto white balance.
Photo button
：
Press this button to save the image. It will save to the U disk(if available)
prior to camera internal storage.
This machine has one USB port only. Please capture the picture with the remote
control. Or an external USB extender to insert a USB flash drive to store images.
Photo reading
：
Press this button to browse the images.
Image comparison
：
Press this button and get the image that needs to be compared,
system will show this image into the right part of the screen, and show the real time
image on the left of screen. Use the mouse to adjust the position of 2 images and
compare.
Mirror image button: Mirror operate the image.
Image up and down adjust button
：
To adjust or switch the image from top to bottom.
Color and black/white convert: To select color or black/white mode for the image.
Freeze button: Current dynamic picture will be frozen by pressing this button, restore to
dynamic picture by pressing this button again.
Press this button will freeze the current dynamic picture, pressing it again will restore the
dynamic picture.
Electric frequency
：
Select the suitable electric frequency to avoid picture scroll.
Color Temperature
：
To choose the right color temperature.
Frame selection area: You can draw the area of interest by dragging with the mouse to
mark the key points.
www.digital-usb-microscopes.com
www.digital-usb-microscopes.com
YSC
Technologies
www.digital-usb-microscopes.com