YS Cheeky MC08, Руководство пользователя

Страница: 13 / 14

10
Troubleshooting
The chair is controlled by a micro - intelligent processor, so it is sensitive to voltage fluctuation. If the
fluctuation exceeds the rated v10% or -15%, the chair may have the following conditions.
Possible Problem Solution
The power line is plugged in, but
the chair can not be operated. 1. Check if the power plug is plugged in properly.
2. Check if the power switch is on “
︱ ” position.
During massage, the controller
can be used, but the chair can
not.
The temperature of the massage engine is too high after a long period
of operation, the massage chair will automatically be in the overheating
protection state. Please turn off the power and stop for using for more
than 30-50 minutes to cool down.
During massage, Nether the
controller nor the chair can be
used. 1. When the automatic timing function activates, and the timing is over,
please press the button again to operate.
2. Turn the power off, and turn it on again to restart the chair.
If you are still unable to solve the problems with the information above, please contact the authorized
service center immediately.
Care & Maintenance
Do not clean the chair with water or chemicals.
Do not stack, stab, slit, harshly pull, or scratch the surface of the massage chair.
Gently press the buttons during operation, and avoid hitting the buttons with hard objects.
Pull out the power supply plug after each use.
Do not use the chair for more than 30 minutes at a time.