
3
Congratulations on your new lights!
Evenings at the boat are going to be so much better.
This guide will assist you to install your new YPHOS lights. The following instructions refer
to GRP (fiberglass) and wooden hulls – for other types of hulls please contact us for correct
guidance. Always make sure that you are familiar with the operations to be done and consult a
specialist to install the lights.
Always follow safety procedures and pay attention to all steps to ensure the longevity of your
new lights. Always wear protective gear and take safety first.
Intended Use
Model 01 is designed to operate as an LED Illumination unit for mounting on GRP or wooden
boat hulls. It can be installed above water level, partially or completely submerged in both
fresh and sea water and can be used anytime – while the boat is still or underway. This
installation manual does not supersede any National or Local Electrical Code.