Get to know YOYOCam G2
STEP 1. Prepare YOYOCam G2
1.
Slide the battery compartment cover downwards.
2.
Lift the battery cover away from the device.
•
WARNING:
Always be sure to switch off YOYOCam and
disconnect the power before inserting or removing the SIM card.
Do not touch the gold contacts of the SIM Card.
•
NOTE:
The SIM PIN must be disabled. Use an ordinary
mobile phone to check and, if necessary, turn off SIM Lock.
3.
Hold the SIM card in line with the slot (gold contacts on the
underside) and slide it in to position.
4.
Replace the battery compartment cover
1.
Mount the bracket on the wall, ceiling or other surface as required.
2.
Attach YOYOCam to the threaded tip of the bracket.
3.
Screw the round lock-nut towards YOYOCam to secure YOYOCam on the mount.
4.
Loosen the screw so that the angle can be adjusted.
5.
Tighten the screw to fix YOYOCam in the desired position.
Note:
There is a second mount position on the underside of YOYOCam. The mount screw-threads are stan-
dard photographic size, so YOYOCam can, for example, be mounted on a camera tripod.
Note:
For best results, avoid pointing YOYOCam at bright lights or windows. See the User Guide for more tips.
STEP 2. Mount YOYOCam G2
Power
switch
Infrared body
detector
Status indicator
Infrared LED lights
Camera
Mirror
Microphone
Reset key
Set key
Mini
USB
(rubber
cover
)
Mount screw
Mount
screw
Battery
compartment
cover
Power
inlet socket