OPERATING INSTRUCTIONS
1.
Turn the thermostat switch to the minimal value, at the same time turn the heat
selecting switch to position “O”.
2.
Plug in the appliance and turn the thermostat switch to the maximum position. Then
turn the heat selecting switch to choose air or warm air. You can choose the
temperature of the warm air as described below. While working, the indicator light
will be on.
2.1.
Turn the heat selecting switch to “
“ position, the heater blows cool air.
2.2.
Turn the heat selecting switch to “I” position, the heater blows warm air, working at
1000W.
2.3.
Turn the heat selecting switch to “II” position, the heater blows warm air, working at
2000W.
2.4.
Turn the heat selecting switch to “O” position, the heater stops working, the indicator
light will be off.
3.
Adjust the thermostat switch to suitable position for desired temperature setting.
3.1.
Check if the thermostat switch is on the maximum position.
3.2.
When you feel the room temperature comfortable, turn the thermostat switch
anti-clockwise slowly to the minimal position until the appliance stops working.Then
the thermostat switch will keep the room temperature at the desired temperature
automatically.
You can also turn the thermostat switch anti-clockwise to the minimum position or turn the
thermostat switch clockwise to maximum position to make the temperature lower or higher.
SECURITY SYSTEM
To avoid the risk of injuries or damaging the internal components, the fan heater has a
security system which will automatically switch off the appliance if the heat reaches the safety
limit. If overheating occurs:
1.
Turn the heat selecting switch to “O” position, turn the thermostat switch to the
minimal position and remove the plug from the socket.
2.
Check if the air flows smoothly through the outlet and inlet, and if the appliance is put
in right position. If so, get it in order before restart the appliance.
3.
Let the fan heater cool down for 8 to 10 minutes before start it again.
4.
Plug in the appliance and switch it on. If the appliance can’t operate normally, remove
the plug immediately from the socket and send the fan heater to appointed service
only.
MAINTENANCE AND CLEANING
1.
Before you turn off the appliance, turn the heat selecting switch to the “
“ position.
After operating for 3 to 5 minutes to lower the internal temperature of the appliance,
turn the heat selecting switch to “O” position.
2.
Clean the air inlet and air outlet of the appliance regularly (at least twice a year).
3.
Before you clean the appliance, turn off the heater first, then remove the plug from the
socket, and wait until the appliance cools down.
4.
Use a damp cloth to clean the surface of the appliance, avoid water going inside the
appliance. Dry the appliance before use it again or store it in a dry place.
