The weather symbols indicate the weather fluctuation over the next 8 hours and not the current weather.
Comfort level
The temperature and humidity is dry (When the humidity is below 40%.)
The temperature and humidity is comfort (When the temperature in 20~28
℃
and the humidity in 40~70%)
The temperature and humidity is wet (When the humidity is above 70%)
F.Y.I.:
When the humidity in 40~70% and the temperature is not in 20~28
℃
,
The comfort level icon will no display.
Trend display
The barometric pressure is rising.
The barometric pressure is falling.
The temperature or humidity is rising.
The temperature or humidity is falling.
If there is no arrow trend, it means
the barometric pressure / temperature / humidity is steadying.
Ice alert
The ice Alert symbol
appears and flashing when the remote sensor temperature at –1.0 ~ 2.9
℃
(30.2~37.3
℉
).
Outdoor temperature Alert
Press button
, you can set the Outdoor temperature alert function ON or OFF, this operation is only valid for the currently displayed channel.
If you want to set other channels, press the
【
CH
】
button to switch to the channel display you want to set. When the symbol
appear means that above upper
limit alert function is ON, symbol
appear means that below lower limit alert function is ON, symbol
or
disappear means that Outdoor
temperature alert function is OFF.
Press and hold
button for 2 seconds, enter the outdoor temperature upper limit or lower limit value setting mode, the set item will flash, press the
or
buttons to set the value, press
button to confirm the item has been set and go to the next one, press the
【
CH
】
button to set the value of other channels.
When the outdoor temperature exceeds the limit set by the channel
，
the temperature value and corresponding icon will be flash, and when the temperature is
refreshed, as long as the temperature still exceeds the set limit, there will be a beep reminder.
Backlight and Projection function
Press and hold the button
for 2 seconds to switch between manual or automatic backlight adjustment modes.
Default manual adjustment of backlight brightness after power on, When the automatic adjustment mode is switched, the symbol
is displayed.
In the manual adjustment mode, turn the knob
○
A
to manually adjust the backlight brightness, after the backlight is dimmed, press the
button once to
jump to the brightest backlight for 10 seconds. P
ress the button
to set the angle of the projection, press and hold the button
for 2 seconds to ON/OFF
the projection.
In the automatic adjustment mode, the product will detect the ambient brightness through the light sensor. When the environment is very bright, the backlight
brightness is also bright. Because the ambient light is too strong, the projection will be automatically turned off. When the ambient brightness is dark, the
backlight brightness will also be automatically dimmed, and the projection function will be automatically turned on.
USB charging interface: (MAX. 5V1A)
You can charge your mobile phone and other devices with the USB port , but keep your phone and other charging devices near the clock only when charging , as during
charging time , mobile phones or other devices can block the RC signal.
