Youshiko YC9361, Руководство пользователя

Страница: 13 / 31

~ 13 ~

Using
“
+
“, “
-
“ button and go to 0 ( Zero ) first and then by
pressing
“
+
“, “
-
“ button ,
choose. Your location altitude,
then press “HISTORY”
, button.

After pressing history button , weather symbol flashes, press the
"+", "-" button to select the weather symbol that fits the current
weather ,
then press “
HISTORY
”, button , after that hPa flashes,
then please use
“
+
“
,
“
-
“ button to select between the air pressure
units hPa and inHG and then
press “
HISTORY
”.

Now leave the
weather station and don’t do any thing.
( Please note: If cannot enter altitude within 20 seconds, No
worries, then remove batteries and disconnect from the mains,
and then start again fresh ) .

Weather station now will start connecting to the outdoor sensor.
This process takes about 3 minutes. Then the display shows the
outdoor temperature and humidity, in case of failure of reception
please press and hold
“CHANNEL“ button
for more than 3
seconds to restart the search process again.

Then the automatic reception of the MSF radio signal starts after 3
minutes of outdoor reception.

While the RCC reception process is going on, the flashing symbol
“radio tower “appears in the time display area, ( W
eather station
may require for 5 to 20 minutes for it to pick up the radio control
signal
, it may fail, if it is near a computer or TV or Wi-Fi hub