4. Time and Alarm Setting
4.1 Radio Controlled Clock:
After the start-up of the unit, the clock automatically starts to scan the MSF time
signal. Radio Control Icon “
” (A1) flashes on LCD.
(A1) flashes,
Indicating now is receiving
MSF signal
(A1) turns on,
Indicating signal received
successfully
(A1) disappear,
Indicating signal reception
failed
The clock automatically synchronized with the MSF radio signal every day at 2.00
a.m. to maintain accurate time keeping. If synchronization with the MSF radio
signal fails, “
” on LCD disappear.
The clock can be set to scan the radio signal manually by holding “
-
” button (B7) for
2 seconds. Each reception takes around several minutes. I
Stop scanning MSF radio signal manually by holding “
-
” button (B7) for 2 seconds.
“
DST
” shown on the LCD if it is in Daylight Saving Time Mode
4.2 Manual Time Setting:
In time display mode, hold “TIME SET” button (B6) for 2 seconds to enter
Clock/Calendar setting Mode.
Press “
-
” (B7) or “
+
” (B8) button to adjust the setting and press “TIME SET”
button (B6) to confirm each setting.
(By keeping the “
-
” (B7) or “
+
” (B8) button pressed, could accelerate the process
and reach the desired value more quickly)
The setting sequence is shown as follow: Hour, Minute, Second, Year, Month,
Date,
℃
/
℉
Note
:
All Setting modes will automatically exit in 15 seconds without any adjustment
4.3 Four Daily Alarm Setting:
Press “ALARM SET” button (B9), time of alarm 1 flashes, press “
-
” (B7) or “
+
” (B8)
button to adjust the alarm time. Press “ALARM SET” button (B9) to confirm the
