12
YRG 1000-UG01
C
oNtroL
p
aNeL
M
eNU
F
eatUres
(
CoNt
.)
Submenu 4 - Preset Options
Here you can customize the performance of many aspects of the YRG
presets. Note that alterations made here will affect only your currently se-
lected preset. Within this submenu, use the UP/DOWN buttons to scroll
to your desired parameter. These are as follows:
Note: To save changes made to your current preset, hold
down the MUSIC button and press the RECORD button.
Switching between presets without doing so will cause you
to lose any unsaved changes.
•
od – Open String Damping
Enabling this option makes it more difficult to trigger open notes.
Use this if you are experiencing unwanted note triggers when soloing
up the neck. With this option displayed, press down on any fret to
toggle open note damping on or off (1 is on, 0 is off ).
•
Sr – Slide Range
Here you can set the number of half steps (1-12) you can slide up or
down. Note that the YRG uses pitch bend for slide, and that if you
slide outside of the set acceptable range, you will trigger a new note.
With this option displayed, press down on a fret to set your desired
slide range. This can be done on any of the six strings. Depressing the
first fret will allow you to slide up or down a single halfstep, while
depressing the twelfth will allow you to slide up or down a full octave.
•
br – Whammy Bar Range
Here you can set the number of half steps (1-12) by which the fully
engaged whammy bar will alter the pitch of any notes being played.
With this option displayed, press down on a fret to select your desired
whammy range. This can be done on any of the six strings. Depressing
the first fret will allow you to bend down or up a single half step,
while depressing the twelfth fret will allow you to bend up or down
a full octave. Note that this setting is limited to being no higher than
the current Slide Range setting (if ‘Sr’ is set to 5, for instance, ‘br’ can
be set anywhere from 1-5, but not to 6).
Note: to reset these parameters to their default settings,
simply press and hold the RECORD button while within
submenu 5. When the operation is complete, the lights on
the control panel will briefly flash.
