Youngkook
User Manual for Positioning PTZ Camera
2
The automatic cruise function means that some presets can be programmed into
the automatic cruise queue in the order required by pre-programming. Only one
command allows the PTZ to automatically set the preset bits in order. Set the time
interval to move back and forth. By setting the preset position at each important
position, it is possible to realize the automatic cruise between the PTZ and the
preset position.
l
Keep Watch
When the PTZ standby time reaches the set value, it can automatically run the
preset position, automatic cruise, automatic scanning and other functions.
Set a function (such as a preset preset, an automatic cruise route, an automatic
scan route) for the pan / tilt head, and the PTZ automatically performs this
function when the standby time is set in the standby mode.
1.2 Product Features
u
YK-PTSHZ-410 high-definition laser integrated PTZ camera, the fuselage
selection of high strength aluminum alloy material, exterior design can resist
strong winds, smooth operation, high precision.
u
Products using high-precision stepper motor and precision worm gear drive
combination, power can be self-locking.
u
Support a variety of lens preset function, zoom adaptive function, the rotation
speed can be automatically adjusted according to the lens zoom factor.
u
Powerful, with preset, cruise, line sweep, keep watch and other functions.
u
Visual pitch angle range, monitoring a wide range of horizontal speed up to
100 °/ s.
u
Equipment has its own automatic heating system, low temperature
automatically start heating function, to ensure that products can be applied to
cold areas.
u
Network transmission signal can reach 100Mbps.