Passive locking means the door will lock when the system passively arms.
In the default factory setting, the system is armed and locked actively, which means
the system will only arm/lock when the remote-pager is utilized.
Page 16
Turbo Mode
If this optional Turbo Mode has been programmed at the time of installation,
you can turn this feature on and off by pressing Buttons
(III+IV)
for a 1/2 second.
In this mode, if the emergency brake has been set, the engine will continue to run
after the key has been taken out of the ignition. It will run until two minutes after the
emergency brake has been set.
To utilize this mode, the emergency brake sensing wire has to be connected to the
emergency brake wire of the vehicle. Consult the authorized dealer for this mode.
This option is ideal for turbo-charged vehicles because it allows the turbo too slowly
cool after operation.
Optional Auxiliary 1 & Auxiliary 2
The auxiliary output system is an optional feature that can be tailored for your
vehicle by your local authorized Young Shin Electronics, Inc dealership. For example,
you can customize your car to have remote power control of your windows, radio,
and sunroof in addition to the rooftop on your convertible car.
Page 17
OPTIONAL INSTALLATION FEATURES
The Young Shin Electronics, Inc 2WAMR remote-pager has additional features and
expansion possibilities that may require additional parts and labor.
Cold Start Mode
If the optional temperature sensor has been installed,
Timer Start
Mode becomes Cold Start Mode. In this mode, your car will automatically start if
the temperature of the inside of the vehicle goes below the preset temperature.
The minimum interval between the starts will be 1.5 or 3.0 hours depending on
preset options during the time of installation. Cold Start Mode is activated or
deactivated by pressing Buttons
(II+IV)
for a 1/2 second.
