9
Cleaning and Maintenance
Always turn off and unplug the diffuser prior to cleaning. To ensure proper
performance, clean the ultrasonic plate and lid after each use. If essential oil
begins to build up on the ultrasonic plate, gently wipe it off using a cotton
swab dipped in rubbing alcohol. If essential oil begins to build up on the
lid, gently wipe it off using mild soap and water only. Never use a corrosive
detergent to clean the ultrasonic plate or damage will occur. Periodically
check under the diffuser to keep the fan intake free of debris. Debris can be
removed by blowing on the fan intake opening or wiping with a clean, dry
cloth. (Do not use aerosol sprays, solvents, or abrasives to clean the plastic
housing.) When not in use, clean the diffuser and store dry. Replacement
ultrasonic plates can be purchased from Young Living.
Troubleshooting
When switched on, the diffuser does not operate. (Potential issues:
power connection, water above water fill line marker)
•
Check that the adaptor is securely plugged into the wall socket and the
rear of the diffuser.
Check that water is in the reservoir and it is not above the red water fill
line marker. If there is too much water, unplug the unit and adjust the water
to the red water fill line marker and restart. The light should come on,
and the diffuser should mist.
!
Notice:
When emptying the
water reservoir, pour
water from the
opposite side of the
base ventilation hole.
•
