aquaMAX
TM
-Basic 360 Series
Chapter 3. Operation
3-1. Operation Mode
To operate the aquaMAX, use a keyboard on upper of the front side. There are following modes available on
LCD.
Basic Mode
「
Operate/Standby
」
Select the
「
Operate
」
or
「
Standby
」
mode.
「
Measure
」
Use to measure following values during operation
- Temperature
- Conductivity of both the feed water and the produced water from RO
membrane
- Resistivity of Ion Exchange Filter / Ion Rejection Ratio of R.O membrane and
Ion Exchange Filter
「
Service
」
Select the following function on
「
Standby
」
mode.
- For the aquaMAX 361/363, select the rejection water(RO/ION) with
Measure
button.
- Drain the low-grade water during initial flushing or operation.
- Use for decreasing inner pressure of filter.
- Notice for filter replacement.
「
Select
」
Use to perform
「
Measure
」
or
「
Service
」
LED Display
Power
Confirm if power is supplied normally.
Operate
Lights
on
「
Operate
」
or
「
Service
」
.
Standby
Lights
on
「
Standby
」
or
「
Service
」
.
Fault
Lights when normal operation is not possible.
18
