STEP1
Align the
Bottom Fixing Bracket(2)
with the hole of the
Rotating
Group (1)
, insert the
M16*85 Outer Hexagon Bolt (3)
, and then
screw on the
M16 Lock Nut (4)
. Insert
16 Bent Pin(13)
and
φ
3.8
Pin (15)
at the same time, and use
M10 Short Hexagon Bolts (14)
to screw into the
Bottom Fixing Bracket (2)
as shown in the
figure to eliminate the gap between the
Bottom fixing bracket (2)
and the
Rotating Group(1).
Note:
Do not overtighten the bolts to prevent
Bottom Fixing
Bracket (2)
and
Rotating Group (1)
components from rotating
easily.