Young Display Y150PN, Руководство пользователя, Страница: 4 / 18

C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
Installing the monitor
Please consider the following advice before you install your monitor
Position : Choose a place that reflects less to place your monitor. Generally, there is a suitable angle with
window.
Highness : The peak of the monitor should be a little lower than your eyes when you sit down.
2.1 Signal cable connection
Plug one connector of the signal cable into the VGA or DVI port and lock the two bolts to ensure firm
grounding. Then plug the other one into the monitor and lock the two bolts.
Please refer the chapter 5 about "Installing the touch screen" in case of the USB or RS232C connection.
2.2 Power cord connection
Plug one side of power cord into the AC adapter and the other side into AC power source outlet, then
plug the output side of AC adapter into the power port at the side of monitor.
2.3 Audio cable connection (Optional)
Plug the stereo cable between the monitor and your PC.
2.4 Power on
Switch on the power to both the monitor and your computer. After the monitor is power on, the LED
lights up green or blue. If the LED becomes red or flashing, please check the video signal cable
connection. If the LED is off, please power switch slightly.
2.5 Self test pattern
If there is no horizontal or vertical sync.signal, your monitor will display Fig.1 to indicate no signal input.
After a few seconds, the monitor will come into waiting and saving power mode; if the monitor receives
the video signal, it will return to the normal mode.
(Fig 1)
NO SIGNAL