7
Attaching the End Sections
Figure 4.
Insert the locator pins
Figure 5.
Insert bolts and
tighten from back
of headboard
Figure 4a.
Enlarged view
Figure 5.
Enlarged view
Figure 6.
Assembled ends to headboard
Step 2:
Insert the (2) metal locator
pins in the lower hole of the
head board post as shown in
Fig 4a.
Support the headboard and
attach the end sections to the
headboard one at a time.
(install the end sections so
that the mattress platform
brackets are to the inside of
the crib). See Fig 6.
Using the (4)
2”
headboard
bolts in the hardware pack,
attach the bolts from the back
of the headboard and tighten
with the provided wrench.
See Fig 5.
Repeat for the remaining End
Section.
Wrench
2” Bolt
Locator Pin