![background image](http://html1.mh-extra.com/html/youjie/zhongli-zl2200/zhongli-zl2200_user-manual_3537611015.webp)
11
Configuration Introduction
Your new scanner has been factory configured with a set of default parameters.
Since many host systems have unique formats and protocol requirements, a
wide range of configurable features that may be selected using this bar code
based configuration tool are provided. Once the configuration is completed, the
scanner stores the settings in nonvolatile memory (NOVRAM). NOVRAM saves
the settings when the power is off.
Note: Bar code descriptions marked with an asterisk ( * ) define a feature that is
a factory default. Bar codes marked with a tilde ( ~ ) require the
Multi-Code configuration method.
Bar Code Configuration Methods
Scanners can be bar code configured in two ways:
the
Single-Code Method
and the
Multi-Code Method
.
Single-Code Method
Most features can be enabled or disabled using the Single-Code Method.
1. Power up the scanner.
2. Scan the bar code for the desired feature.
3. The scanner will emit a multi-toned beep to indicate the configuration
has been saved to NOVRAM.
Multi-Code Method
All features can be enabled or disabled using the Multi-Code Method.
A feature marked with a tilde ( ~ ) requires the Multi-Code Method.
1. Power up the scanner.
2. Scan the E
nter/Exit Configuration Mode
bar code (3 beeps).
3. Scan the bar code for the desired feature (1 beep). Multiple features can
be enabled/disabled before scanning the enter/exit configuration mode
bar code.
4. Scan the E
nter/Exit Configuration Mode
bar code (3 beeps) and save
the new configuration. To abort a configuration change, power off the
scanner before scanning the
Enter/Exit
code.
Enter/Exit Configuration Mode
³
9
9
9
9
9
9
Содержание ZhongLi ZL2200
Страница 1: ...ZhongLi ZL2200 Bar Code Scanner User s Guide...
Страница 7: ...3...
Страница 34: ...ZL2200 UG Rev A 1 14...