Button and LED Indicator Location
Motion Sensor Mode
When the button is pressed for more than 5 seconds, the scanner will
go into Virtual Global Shutter mode. Virtual Global Shutter mode
promotes motion tolerance performance and the illumination will
flicker. When the button is pressed for 5 seconds again, the scanner
will go into Rolling Shutter mode. While in Rolling Shutter mode, the
illumination will remain on.
Default = Virtual Global Shutter mode.
Mobile Phone Read Mode
When the button is quickly pressed, the scanner will go into Mobile
Phone Read Mode. In this mode your scanner is optimized to read
bar codes from mobile phone or other LED displays. When the
button is quickly pressed again, the scanner will exit Mobile Phone
Read Mode.
Right Blue LED
Good Read
Left Blue LED
Error
Button/Green
LED
Button
See
Motion Sensor Mode
Green LED
Mobile Phone Read Mode activated
Left Blue LED
Right Blue LED
Button/Green
LED
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
website,
www.youjieaidc.com.
1. Scan the
Enter Data Format
symbol.
2. Primary/Alternate Format: scan
0
for Primary Format
3. Terminal Type: scan
099
for any terminal type
4. Code I.D.: scan
99
for any bar code type
5. Length: scan
9999
for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan
Save
to save your entries.
Enter Data Format
Clear All Data Formats
Save
Programming Chart
0
2
1
4
3
5
6
7
A
B
C
D
E
F
9
8
Save
Technical Assistance
Contact information for technical support, product service, and repair
can be found at
www.youjieaidc.com
.
User Documentation
For localized versions of this document, and to download the User’s
Guide, go to
www.youjieaidc.com
.
Disclaimer
Youjie reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the
reader should in all cases consult Youjie to determine whether any
such changes have been made. The information in this publication
does not represent a commitment on the part of Youjie.
Youjie shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated into another language
without the prior written consent of Youjie.
Copyright 2014
.
All rights reserved.
Web Address:
www.youjieaidc.com
Limited Warranty
Youjie warrants its products to be free from defects in materials and
workmanship and to conform to Youjie’s published specifications
applicable to the products purchased at the time of shipment. This
warranty does not cover any Youjie product which is (i) improperly
installed or used; (ii) damaged by accident or negligence, including
failure to follow the proper maintenance, service, and cleaning
schedule; or (iii) damaged as a result of (A) modification or alteration
by the purchaser or other party, (B) excessive voltage or current
supplied to or drawn from the interface connections, (C) static elec-
tricity or electro-static discharge, (D) operation under conditions
beyond the specified operating parameters, or (E) repair or service
of the product by anyone other than Youjie or its authorized repre-
sentatives.
This warranty shall extend from the time of shipment for the duration
published by Youjie for the product at the time of purchase ("War-
ranty Period"). Any defective product must be returned (at pur-
chaser’s expense) during the Warranty Period to Youjie factory or
authorized service center for inspection. No product will be
accepted by Youjie without a Return Materials Authorization, which
may be obtained by contacting Youjie. In the event that the product
is returned to Youjie or its authorized service center within the War-
ranty Period and Youjie determines to its satisfaction that the prod-
uct is defective due to defects in materials or workmanship,Youjie, at
its sole option, will either repair or replace the product without
charge, except for return shipping to Youjie.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE
LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
COVENANTS OR WARRANTIES, EITHER EXPRESSED OR
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITA-
TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGE-
MENT.
YOUJIE’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE
REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR
OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW
OR REFURBISHED PARTS. IN NO EVENT SHALL YOUJIE BE
LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF YOU-
JIE ARISING IN CONNECTION WITH ANY PRODUCT SOLD
HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A
CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHER-
WISE) EXCEED THE ACTUAL AMOUNT PAID TO YOUJIE FOR
THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL
REMAIN IN FULL FORCE AND EFFECT EVEN WHEN YOUJIE
MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROV-
INCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
All provisions of this Limited Warranty are separate and severable,
which means that if any provision is held invalid and unenforceable,
such determination shall not affect the validity of enforceability of the
other provisions hereof. Use of any peripherals not provided by the
manufacturer may result in damage not covered by this warranty.
This includes but is not limited to: cables, power supplies, cradles,
and docking stations. Youjie extends these warranties only to the
first end-users of the products. These warranties are non-transfer-
able.
The duration of the limited warranty for the Youjie HF600 scanner is
ninety (90) days.
For additional information, please refer to
www.youjieaidc.com
.
产品有毒有害物质或元素清单
本产品表面标识的环保使用期限是在正常使用情况下 （产品正常使用具体条件请参见产品使用手
册）的环保使用期限，下表为产品中含有有毒物质的部件清单
:
部件名称
有毒有害物质或元素
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
上盖组件
╳
〇
〇
〇
〇
〇
下盖
╳
〇
〇
〇
〇
〇
成像式二维
条码阅读器
〇
〇
〇
〇
〇
〇
电路板
〇
〇
〇
〇
〇
〇
电源线
〇
〇
〇
〇
〇
〇
〇
:
该物质在对应元器件中的含量满足
SJ/T 11363-2006
规定的限量要求
╳
:
该物质在对应元器件中的含量超出
SJ/T 11363-2006
规定的限量要求
除上表所示的部件外，以下部件的环保使用期限为
10
年。
环保使用期限
部件名称
有毒有害物质或元素
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
电源
╳
〇
〇
〇
〇
〇
数据线
╳
〇
〇
〇
〇
〇
〇
:
该物质在对应元器件中的含量满足
SJ/T 11363-2006
规定的限量要求
╳
:
该物质在对应元器件中的含量超出
SJ/T 11363-2006
规定的限量要求
10