YJ-HF600
Area-Imaging Scanner
Quick Start Guide
YJ-HF600-QS Rev (a)
12/14
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn off computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
RS232:
Keyboard Wedge:
Reading Techniques
Present the bar code to the scanner. The LEDs turn up to read the
code.
Standard Product Defaults
The following bar code resets all standard product default settings.
Standard Product Defaults
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Program Keyboard Country
Save
Suffix
If you want a carriage return after the bar code, scan the
Add CR
Suffix bar code
. To add a tab after the bar code, scan the
Add Tab
Suffix
bar code. Otherwise, scan the
Remove Suffix
bar code to
remove the suffixes.
Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add CR Suffix
Remove Suffix
Add Tab Suffix
Add Code ID Prefix To All Symbologies (Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR suffix
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
RS232 Interface
Scan Modes
When in
IR Trigger
mode, the scanner is activated when it “sees” a
bar code After the bar code is read, the scan illumination will turn off.
When in
IR Trigger - Mobile Phone
mode, your scanner is optimized
to read bar codes from mobile phone or other displays.
When in
Presentation
mode, the scanner is activated when it “sees”
a bar code. After the bar code is read, the scanner continuously
searches for bar codes for 5 seconds. After 5 seconds and no bar
code is read, the scan illumination will turn off. When in
Presentation - Mobile Phone
mode, your scanner is optimized to
read bar codes from mobile phone or other LED displays.
When in
Streaming Presentation - Normal
mode, the scanner
leaves the scan illumination on all the time and continuously
searches for bar codes. When in
Streaming Presentation - Mobile
Phone
mode, your scanner is optimized to read bar codes from
mobile phone or other LED displays.
Default = IR Trigger mode.
IR Trigger Mode
(Default)
IR Trigger Mode - Mobile Phone
Presentation Mode
Presentation Scanning - Mobile
Phone
Streaming Presentation -
Normal
Streaming Presentation - Mobile
Phone