Important information
Taking care and safe use of your Youha THE INS breast
pump product
(continued)
Use of UV sterilisers is not recommended as it will yellow the
silicone parts and shorten the lifespan of the parts or possibly
damage them.
Do not use a cleaning brush inside the valves as this may
damage the valve or shorten its lifespan.
Replace the valves at first signs of wear, if damaged or after
every 2-4 weeks of use to maintain optimal effectiveness of
your pump (1 pair of spare valves are included).
Replace all other pump parts at first signs of wear, if damaged
or after every 2-6 months.
Store all parts in a cool, dry space and avoid direct sunlight.
Do not clean, sterilise or submerge pump motor unit and / or
charging cable.
Only use 5V / 1-3A charger with USB Type-C cable to
recharge battery in motor unit.
Do not leave the motor unit on charge for longer than 24
hours as this may damage the battery permanently and/or
cause a safety risk.
Keep this product out of reach of children at all times. This
product contains small parts which may be a choking hazard.
5
Important information
4
Preparation is important
Wash your hands with soap and water and dry them
thoroughly before assembling parts for expressing.
Ensure all parts of the pump are clean and dry before
each use.
Taking care and safe use of your Youha THE INS breast
pump product
This product is a personal care item and use should not be
shared between mothers.
Do not use the breast pump while you are pregnant, as
pumping may induce labor.
Ensure you are fitted with the correct size of breast shield. If
you experience any discomfort or pain while using your THE
INS breast pump, seek professional advice from a Lactation
Consultant to ensure you have the best fitting breast shield for
you.
Do not continue pumping for more than five minutes at a time
if you do not succeed in expressing any milk.
Always switch off the breast pump before you remove the
pump from your breast.
Avoid harsh detergents or hard scourers and sponges as this
may scratch or damage the product. Exposure to detergent
may make the silicone appear cloudy over time.
