You-Q Liam, Руководство по обслуживанию

Страница: 16 / 33

5.2.2. Replace a rubber suspension
Procedure
1. Lift the wheelchair until the wheels are free
from the floor.
•
Use a lifting platform.
2. Remove the locking ring (A) from the rubber
suspension to lower the motor arm (B).
3. Remove the old rubber suspension (C) from
the carrier frame.
•
The suspension is directly screwed on
the carrier frame.
4. Put the new rubber suspension on the
carrier frame.
5. Connect the motor arm to the rubber
suspension and install the locking ring.
A
C
B
5.2.3. Replace the carbon brushes
Preparation
See section 5.2.1.
Procedure
1. Remove the cap (A).
2. Remove the old carbon brush (B).
3. Gently blow some air through the hole (to
remove any dust).
4. Put the new carbon brush in the motor.
5. Put the cap on the motor.
6. Repeat steps 1 through 5 for all the carbon
brushes on the motor.
7. Mount the motor arm on the wheelchair.
See section
5.2.5.
A
B
Maintenance tasks & adjustments
16 Service manual - Liam