background image

Congratulations on your latest Target purchase. 

Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. 

Good luck – though we're confident you won't need it.

ATTENTION:

This Chair is not intended for use during any kind of inclement weather and the manufacturer is not 

and can not be held responsible for any damages caused as a result of such weather. Weather-related

damage, or damage as a result of the Chair not being stored properly when not in use is not the 

responsibility of the manufacturer.

During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, 

sleet), freezing conditions and extreme heat, the Chair needs to be stored in a dry sheltered place to 

prolong the life and to avoid damage to the Chair.

2

IMPORTANT WARNING:

Unpack the box on a clean soft level surface and make sure all parts have been included.

To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

 

Содержание Target Risley FRA81029











Отзывы: