STEP 3
A. ROTATE ASSEMBLED UNIT TO THE STANDING
POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A) AND LEFT
ARM (B) WITH FLAT WASHERS AND SHORT BOLTS
(E) AND FLAT WASHERS AND LONG BOLTS (F) USING
ALLEN WRENCH (G). DO NOT TIGHTEN
COMPLETELY.
C. COMPLETELY TIGHTEN ALL BOLTS WITH ALLEN
WRENCH (G) FROM STEPS 1 THROUGH 3.
STEP 2
A. ROTATE ASSEMBLED UNIT TO HAVE RIGHT ARM
ON FLAT, PROTECTED SURFACE.
B. CONNECT LEFT ARM (B) TO SEAT (D) WITH FLAT
WASHERS AND SHORT BOLTS (E) USING ALLEN
WRENCH (G). DO NOT TIGHTEN COMPLETELY.
STEP 1
A. PLACE SEAT (D) ON A FLAT, PROTECTED SURFACE
WHILE HOLDING IT ON ITS SIDE AS SHOWN.
B. CONNECT RIGHT ARM (A) TO SEAT (D) WITH FLAT
WASHERS AND SHORT BOLTS (E) USING ALLEN
WRENCH (G). DO NOT TIGHTEN COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)
SONOMA CLAREMONT STATIONARY CHAIR CHAT SET ASSEMBLY INSTRUCTIONS
Page 2/6
