background image

 

 

 
Thank you for choosing a Yost Vise.  For future reference please record the following: 
 
 
Model #: 

910-AS 

Purchase Date: 

_____________ 

Supplier: 

_____________ 

I n s p e c t i o n   a n d   A c c e p t a n c e

 

 

Claims for damage, shortage or errors in shipping must be reported within one (1) day 
following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer 
receives any products to inspect such products and services for defects and 
nonconformance which are not due to damage, shortage or errors in shipping and notify 
Seller, in writing, of any defects, nonconformance or rejection of such products. After 
such seven (7) day period, Buyer shall be deemed to have irrevocably accepted the 
products, if not previously accepted. After such acceptance, Buyer shall have no right to 
reject the products for any reason or to revoke acceptance. Buyer hereby agrees that such 
seven (7) day period is a reasonable amount of time for such inspection and revocation. 
Buyer shall have no right to order any change or modification to any product or services 
previously ordered by Buyer or its representatives or cancel any order without Seller's 
written consent and payment to Seller of all charges, expenses, commissions and 
reasonable profits owed to or incurred by Seller. Specially fabricated or ordered items 
may not be canceled or returned, and no refund will be made. The sole and exclusive 
remedy for merchandise alleged to be defective in workmanship or material would be the 
replacement of the merchandise subject to the manufacturer's inspection and warranty. 

Product Specifications: 

 
1. 

Technical Statistics:   

 
Model 

Item  

Jaw 

Jaw 

Pipe 

Throat 

Number 

Number 

Width 

Opening   

Capacity   

Depth   

Weight    

910-AS 

10910 

10”  

10”  

7/8" – 2-5/8"   4"  

56lb 

 
2.

 

Jaws able to withstand a load of no less than 1600 inch pounds without distortion 
of the vise or any components. 

 
3.

 

Hardened steel serrated jaws have a Rockwell C hardness of RC 52-58. 

 
 

 
 
 
 
 
IMPORTANT SAFETY INSTRUCTIONS 

Содержание 910-AS







Отзывы: