a) Strip the stock fender light wire ends
1/4” - 1/2” and insert into
BN-SSS-22-18,
butt connectors provided in the kit.
b) Center the spliced wire ends in the
middle and using a heatgun or lighter,
apply heat evenly on the outer edges of
the butt connector to shrink and hold
wires in place.
c) Making sure that the stripped ends are
centered, heat the center of the butt
connector evenly until the solder begins
to liquify.
d) Allow to cool completely and tug both
ends of the wires to verify that connection
is secured.
Scan for link to butt connector instruction video.
6. Re-connect license plate light and turn signal
connectors.
7. Re-install the rear tail cover and re-install rider
seat.
8. Check for proper function of license plate light,
turn signals, brake light, and that all brackets
and components are secure prior to riding.
4
