Figure 4
Silicone tubing connection instructions (side view).
Important to avoid breaking the device!
When removing silicone tubes, it is necessary to use a sharp tool. First, the tubes must be cut off
at the edge of the sensor, then you can cut off the rest of the tube located along the black sensor.
Be careful to gently remove the rest of the silicon tube without breaking the sensor.
5. Place the brackets according to their use:
●
The sensor measuring the higher pressure must be placed where the higher
pressure occurs
●
The sensor measuring the lower pressure must be placed where the pressure is
lower
Figure 5
Connecting silicone tubing with pitot tubes.
3
