7
Y
Y
SM
Connectivity &
Operational Guide
Connecting the speakers
Connect the active speaker and passive speaker
with the included connecting cable (red cable to
red wire clamp, and black cable to the black).
The monitors have a variety of inputs for use
with a multitude of devices. Soundcards or other
devices with RCA line outputs can be connected to
the RCA inputs on your left speaker’s back panel.
Professional audio devices with balanced or unbal-
anced 1/4-inch outputs should be connected to the
1/4-inch TRS back panel inputs. If your soundcard
or portable music player has an 1/8-inch output,
you can connect it to the front panel aux input,
using the provided 1/8-inch to 1/8-inch cable.
Connect to A.C. Power Outlet
Please connect the A.C. power plug to the correct A.C. voltage outlet. Before connecting
power, please make sure that the On/Off switch on the back is set to the off position.
Bluetooth Pairing
Perform the following steps to pair your mobile device with the speakers.
1. Flip the Power Switch on the real panel of the Master Speaker to the ON position.
The LED Power indicator on the front panel is on blue.
2. Press for 3 seconds the Bluetooth Pairing Button on the rear panel of the Master
Speaker. The LED indicator on the front panel will begin flashing, indicating that the
speaker is in Bluetooth pairing mode.
3. Open the Bluetooth setting on your mobile device, then scan for nearby
Bluetooth devices.
4. Locate and select the YSM3BT entry. The LED indicator will remain illuminated is
on white. Indicating that the Bluetooth connection has been successfully made.
Note that the output of the speakers is the sum of all inputs. Unless you
specifically want to listen to a mix of different sources, only one audio input
should be in active use at a time.
