1
Mic In
The balanced XLR
microphone input can be
used with any dynamic
microphone.
Line In
The balanced XLR/1/4-inch
combi-jack input can be
used with any line source
such as a CD player or
an electronic instrument
with a line output. It is
always recommended to use
balanced sources. This helps prevent the risk
of hum or buzz associated with unbalanced
connections, especially if the cable is long
or the source is operated from a separate
AC power connection. Unlike the Mic In, the
Line In does not have it’s own level control so
connection to the Line In and the Mic In at the
same time are not recommended.
Mix Out
To allow operation of multiple NX25P
loudspeakers, from one source, this line
output is provided. It should be connected
to the Line In of the next
NX25P in the chain. When
connecting multiple NX25P
loudspeakers, the last
NX25P in the chain should
be turned off first (and on
last). Each NX25P should
be turned on or off before
the previous NX25P in the
chain. This will eliminate
unwanted on/off noises.
Mic Gain Control
The microphone level control
adjusts the mic level of the
loudspeaker. It also adjusts the
mic level on all NX25P enclosures in
the chain (if multiple NX25P enclosures are
used). The main Level control should be set to
maximum when the microphone is being used.
Level Control
The Main level control sets the level of all
sound coming out of the NX25P enclosure.
Unlike the Mic Gain control, this control does
not affect the signal coming out the Mix Out.
In systems using multiple NX25P enclosures
NX25P - Active Speaker - 200w, 12 inch / 1 inch
The NX25P offers the b est value in a 12-inch and horn active loudspeaker enclosure. The enclosure
is the same proven design as the NX250 passive loudspeaker and uses the same rugged and
reliable speaker components. The biamped 200-watt power module has a minimum of controls yet
provides maximum versatility making the NX25P the ideal solution for many applications.
A 3-band EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack
line input on the power module means the NX25P can be easily connected to any source and quickly
EQ balanced for the room. An XLR balanced line output allows multiple NX250’s to be linked together
for use in an array or for easy distribution around a large room when used as repeater cabinets.
The horn/tweeter amplifier uses two-tier class A/B technology, allowing the horn to produce
clean transients to keep up with the high output of the woofer. The woofer, or low frequency,
amplifier uses class-H 2-tier amplifier technology. This achieves a lighter weight, more efficient
amplifier with higher headroom (and lower operating temperature). Each amplifier has it own
limiter to prevent distortion caused by clipping.
The NX25P enclosure, like all enclosures in the NX loudspeaker line, has been designed for
maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor
cabinet (with well-protected inputs and controls). The NX25P can easily be used in any
orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care
was taken designing the components to reduce extraneous heat production.
Features
· Ultra-light variable density acoustic foam construction
· Dual purpose full range and wedge monitor format enclosure
· Ultra-clear reproduction throughout bandwidth
· Lightweight, high efficiency, high tech, 200 Watt biamped power module
· combi-jack XLR/1/4-inch TRS input
· An XLR output for easy connection and looping
· Direct microphone input with level control
· Three band overall EQ controls
· 12-inch Ceramic Magnet Woofer
· High quality 1-inch High Frequency driver
· Integrated flying hardware (3/8-inch threaded holes)
· Tough, full length metal grille
· Recessed panel
Содержание NX25P Series Two
Страница 12: ...10 ...
