Printed In CANADA
DOC-YS-Green-00-1v0PR02 • July 14, 2014
To get the full Owner’s Manual please visit our website at
http://www.yorkville.com/manuals/
or, if you need a printed version call
905-837-8777
Power and Clip LED
The Power LED illuminates green when power is on and the Clip LED
illuminates when the signal is too strong and adjustment is needed to either
the input’s signal or the input level control.
Link
The Link jack enables chained NX10C-2s to be controlled by the first NX10C-2 in the chain.
XLR Mic / 1/4-inch Line
The XLR Mic input part of the combi-jack is optimized for both dynamic and
condenser microphones (phantom power enabled).
The 1/4-inch Line input part of this combi-jack is in parallel with the Line level combi-
jack and can be used as a Link out for parallel connecting multiple NX10C-2s when
individual control on the enclosures is needed with an individual input signal.
Mic Level
The Mic Level knob controls the level of the XLR Mic Input part of the combi-jack.
EQ
The EQ knob allows control of the equalization of the NX10C-2.
Line Level Knob
The Line level knob controls the level of the line level input signals.
XLR Line / 1/4-inch Line
The XLR Line and 1/4-inch Line combi-jack input should be used for all non-
microphone audio souces such as external audio mixers.
1/8-inch Line
The 1/8-inch Line input jack is a typical ‘stereo’ audio input which properly sums
the left and right signals from stereo sources such as MP3 players.
Printed In CANADA
QuickStart-NX10C-2-1v1 • YS#QSTART-NX10C2 • January 22, 2020
