YORKVILLE AP6020, Руководство по обслуживанию

Страница: 16 / 21

2
1/4"
1.
OF TRANSISTOR
PT# 3922
3
1
4. REMOVE GROUND TAB ON XLR JACKS.
AGAINST THE COPPER SURFACE
IT IS IMPERATIVE THAT LEGS
AFTER MOUNTING DEVICE
USE #8799 TO MOUNT TRIAC Q30
MUST BE BROKEN HERE
8. FOR EACH AMPLIFIER ONLY 2PCS OF M1149 SUB-BOARDS ARE NEEDED.
THE THIRD ONE IS A SPARE ONE.
6. BEFORE WAVE SOLDER, CHECK FOR MISSING TABS
HIGHLIGHTED BY THICKER LEGEND SILKSCREEN.
3. SCREW DOWN BRIDGES WITH #8753 SCREW.
BEND DOWN 1/4" FROM BODY
2. CUT LARGE CAP LEADS BEFORE WAVE SOLDER.
DO NOT CUT LEGS #2 OR #3
MARKED 2 AND 3 ARE BENT FLAT
BEND LEGS IN DIRECTION SHOWN
IMPORTANT!
PRODUCTION NOTES
THIS CONNECTION
SEE LAYOUT DIAGRAM
MOUNTING DETAILS FOR Q30 TRIAC
M1177 AP6020 / M1371 AM4CE