York YHAU-CE, Установка, эксплуатация и обслуживание, Страница: 47 / 136

JOHNSON CONTROLS
47
SECTION 4 - TECHNICAL DATA
FORM 155.35-ICOM2.EN.CE/GB (1018)
DATE: 10/30/2018
4
Scope of Delivery
Johnson Controls scope of delivery for the upper com-
munication system covers the control panels for the
upper communication function. The customer must de-
liver all other related equipment: concentrator (HUB),
installation, wiring, communication program for the
central monitoring unit, and so on. See Table 5 on page
47
below for more information.
TABLE 5 - SCOPE OF DELIVERY
ITEM CUSTOMER JCI REMARKS
Control panel with
upper communication
function
X Communication protocol: Modbus TCP
Data concentrator
(HUB)
X Installation and wiring are included
Wiring work for Ethernet
connection
X Apply twisted pair cable
Communication
program for central
monitoring unit
X See Table 6 on page 47 and Table 7 on page
47 for the details of the IP address, function
code, communication data address, and other
relevant information.
Connection Port for Ethernet Communication
Make sure that the Ethernet cable is plugged into the correct port on the Control Panel. The Ethernet connection port
is located at the bottom left on the back of the Control Panel.
TABLE 6 - ETHERNET INTERFACE SPECIFICATION
ITEM SPECIFICATION
Communication format 10BASE-T or 100BASE-TX
Connector shape RJ-45 type modular jack connector
LED function Active
(Green)
Blink Data sending or receiving
No light No data sending or receiving
Link
(Green)
Blink Data sending or receiving via
10BASE-T or 100BASE-TX
No light No connection or successor job failure
Communication Specification
TABLE 7 - COMMUNICATION SPECIFICATIONS
Communication Protocol Modbus TCP
Communication Path Type 10BASE-T or 100BASE-TX
IP Address (No. 1) 192.168.1.1, (No.2) 192.168.1.2, (No. 3) 192.168.1.3
Subnet Mask 255.255.255.0
Function Code Read Command
(Digital Signal) 0.1 Read Coil
(Analog Signal) 0.3 Read Holding Register
Write Command
(Digital Signal) 0.5 Force Single Coil