manualshive.com logo in svg

York YCUZ330A3, Установка, эксплуатация и обслуживание

Поделиться
Скачать
York YCUZ330A3 Скачать руководство пользователя страница 41

FORM 195.26-NM3

YORK INTERNATIONAL

41

only necessary once in a several month period. It also
eliminates the need for operator intervention to erase
the schedule after the holiday passes.

If an error is made while programming, press CAN-
CEL. This will clear all programmed (*) “holiday” days.
The schedule can then be reprogrammed.

The “0” key will not cancel out a “*” and cannot be used
for correcting a programming error.

Manual Override

When the MANUAL OVERRIDE key is pressed, the
Daily Schedule programmed into the chiller will be ig-
nored and the chiller will start-up when water tempera-

MANUAL
OVERRIDE

ture allows, unit switch permits, and system switches
permit.

Normally this key is not used unless an emergency
forces the chiller to require operation during a period
where the programmed Daily Schedule is calling for
the chiller to be OFF (Daily Schedule Shutdown).

Once activated, MANUAL OVERRIDE is only active
for a period of 30 minutes. It is for servicing only and is
designed so that if let on accidentally, the micropro-
cessor will automatically return to the Daily Schedule.

M A N U A L

O V E R R I D E

Содержание YCUZ330A3

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды