York YCUL0020 Скачать руководство пользователя страница 15

Страница: 15 / 178

JOHNSON CONTROLS

Form 150.63-NM9

Issue date: 5/20/2021

Section 2 – Product description

Introduction

YORK Air-Cooled Scroll Condensing Units are the

perfect refrigeration components for all air condition-

ing applications that use DX central station air han-

dling. They are designed for outside (roof or ground

level) installation. Each unit includes hermetic scroll

compressors, an air-cooled condenser, and a weather

resistant microprocessor control center, all mounted on

a formed steel base.
The unit is pressure-tested, evacuated and given a nitro-

gen holding charge, and includes an initial oil charge.

The R-410A refrigerant is provided by other suppliers.

After assembly, a operational test is performed to en-

sure that each control device operates correctly.
The unit structure is heavy-gauge, galvanized steel.

This galvanized steel is coated with baked-on pow-

der paint which, when subjected to ASTM B117 1000

hour, salt spray testing, yields a minimum ASTM 1654

rating of 6. Units are designed in accordance with

NFPA 70 (National Elec tric Code), ASHRAE/ANSI 15

Safety code for mechanical refrigeration, and are cETL

listed. All units are produced at an ISO 9000-registered

facility.
All exposed power wiring is routed through liquid-

tight, non-metallic conduit.

General System Description
Compressors

The condensing unit has suction-gas cooled, hermetic,

scroll compressors. The YCUL compressors incorpo-

rate a compliant scroll design in both the axial and

radial direction. All rotating parts are statically and

dynamically balanced. A large internal volume and oil

reservoir provides greater liquid tolerance. Compres-

sor crankcase heaters are also included for extra pro-

tection against liquid migration.
An annular discharge check valve and reverse vent as-

sembly provides low pressure drop, silent shutdown,

and reverse rotation protection.

Condenser

Coils

– Fin and tube condenser coils of seamless, in-

ternally-enhanced, high-condensing-coefficient, corro-

sion resistant copbeforetubes are arranged in staggered

rows, mechanically expanded into aluminum fins. Inte-

gral subcooling is included. The design working pres-

sure of the coil is 650 psig (45 barg).

Low Sound Fans

The condenser fans are composed of corrosion resis-

tant aluminum hub and composite blades molded into

a low noise airfoil section. They are designed for maxi-

mum efficiency and are statically and dynamically bal-

anced for vibration-free operation. They are directly

Figure 1 -

YCUL Air-Cooled Scroll Compressor Condensing Unit

Содержание YCUL0020



















































































































































































Результаты поиска

Содержание YCUL0020

Отзывы:

Похожие инструкции для YCUL0020

Бренды по названию

Популярные бренды

York YCUL0020, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание YCUL0020

Отзывы:

Похожие инструкции для YCUL0020

Бренды по названию

Популярные бренды