York YCUL0020 Скачать руководство пользователя страница 11

Страница: 11 / 178

JOHNSON CONTROLS

Form 150.63-NM9

Issue date: 5/20/2021

Section 1 – General equipment information and safety

Introduction

The 15 ton through 80 ton (50 kW through 280 kW)

YCUL models are shipped complete from the factory

ready for field installation.
The unit is pressure-tested, evacuated and given a ni-

trogen holding charge and includes an initial oil charge

(R-410A refrigerant supplied by others). After assem-

bly, an operational test is performed to ensure that each

control device operates correctly.
The unit structure is heavy-gauge, galvanized steel.

This galvanized steel is coated with baked-on powder

paint which, when subjected to ASTM B117 1000 hour

salt spray testing, yields a minimum ASTM 1654 rat-

ing of 6. Units are designed in accordance with NFPA

70 (National Elec tric Code), ASHRAE/ANSI 15 Safe-

ty code for mechanical refrigeration, and are cETL

listed. All units are produced at an ISO 9000-registered

facility.

Compressors

The condensing unit has suction-gas cooled, hermet-

ic, scroll com pressors. The compressors incorporate

a compliant scroll design in both the axial and radial

direction. All rotating parts of the compressors are

statically and dynamically balanced. A large internal

volume and oil reservoir pro vides greater liquid toler-

ance. Compressor crankcase heaters are also included

for extra protection against liquid migration.

Condenser
Coils

Fin and tube condenser coils of seamless, inter nally-

enhanced, high-condensing-coefficient, corrosion re-

sistant copbeforetubes are arranged in staggered rows,

mechanically expanded into aluminum fins. Integral

subcooling is included. The design working pressure

of the coil is 650 psig (45 barg).

Low Sound Fans

The condenser fans are composed of corrosion resis-

tant aluminum hub and composite blades molded into

a low noise airfoil section. They are designed for maxi-

mum efficiency and are statically and dynamically bal-

anced for vibration-free operation. They are directly

driven, and positioned for vertical air discharge. The

fan guards are constructed of heavy-gauge, rust-resis-

tant, PVC (polyvinyl chloride)-coated steel wire.

Motors

The fan motors are totally enclosed air-over (TEAO),

squirrel-cage type, current protected. They feature ball

bearings that are double-sealed and permanently lubri-

cated.

Refrigerant Circuit

All unit piping will be copbeforewith brazed joints.

The liquid line will include a field connection shut-off

valve with charg ing port located on each condenser

circuit. Suction line connections are provided on each

refrigeration circuit. A filter drier and sight glass are

shipped loose for field installation on each refrigerant

circuit.
All expansion valves, liquid line solenoid valves,

refriger ant, and refrigerant field piping are supplied by

others.

Warranty

Johnson Controls warrants all equipment and materials

against defects in workmanship and materials for a pe-

riod of eighteen months from date of shipment, unless

labor or extended warranty has been purchased as part

of the contract.
The warranty is limited to parts only replacement and

shipping of any faulty part, or sub-assembly, which has

failed due to poor quality or manufacturing errors. All

claims must be supported by evidence that the failure

has occurred within the warranty period, and that the

unit has been operated within the designed parameters

specified.
All warranty claims must specify the unit model, serial

number, order number and run hours/starts. Model and

serial number information is printed on the unit identi-

fication plate.
The unit warranty will be void if any modification to

the unit is carried out without written approval from

Johnson Controls.
For warranty purposes, the following conditions must

be satisfied:

• The initial start of the unit must be carried out by

trained personnel from an Authorized Johnson

Controls Service Center (see

SECTION 6 – COM-

MISSIONING).

• Only genuine YORK approved spare parts, oils,

coolants, and refrigerants must be used.

Содержание YCUL0020



















































































































































































Результаты поиска

Содержание YCUL0020

Отзывы:

Похожие инструкции для YCUL0020

Бренды по названию

Популярные бренды

York YCUL0020, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание YCUL0020

Отзывы:

Похожие инструкции для YCUL0020

Бренды по названию

Популярные бренды