b. Plastic Front Panel
1 The Plastic Front Panel can easily become dirty. To clean it, shut power *OFF*, remove Front
Panel & Wipe it with a soft dry cloth.
2 When it is extremely dirty, wipe with a soft cloth containing lukewarm water or neutral soap. Then
wipe thoroughly with a soft dry cloth.
3 Never use hot water more than 95 F (35 C), Benzene, gasoline, acid, thinner and brush, because
these will damage the Plastic Surface and the coating.
c. Condenser & Evaporator Coils
1 Coils should be cleaned periodically to have better cooling efficiency. Use a soft brush or vacuum
cleaner to clean them, make sure that the Condenser Rear and the Evaporator Front Fins are not
damaged.
2 Steam cleaning can be done.
3. Do not touch the fins of the coil with bare hands
d. Servicing
We recommend complete servicing of the Air conditioner prior to start of the Season (Summer
season in case of Cool Models, Summer & Winter season in case of Cool/Heat Models) to ensure
trouble free operation during respective seasons. This will also increase the Life of the Unit.
Before asking for Service, check the following Points
When operation fails :
1 Is the fuse all right?
2 Is the supply voltage extremely high or low?
3 Is the temperature dial in a suitable location in the scale?
When cooling is inadequate :
1 Is the Air filter chocked with dust?
2 Is the Sun light directly falling on the outdoor rear side of the Room Air conditioner?
3 Is the air flow of the outdoor side (condenser) obstructed?
4 Are the Doors, Windows open or is there any other source of heat in the Room?
5 Is the Exhaust Damper open?
6 Is the temperature dial in a suitable location in the scale?
When heating is inadequate :
1 Is the Air filter chocked with dust?
2 Are the Doors, Windows open or is there any other source of heat in the Room?
3 Is the Exhaust Damper open?
4 Is the temperature dial in a suitable location in the scale?
9
