
AUTO
COOL
DRY
HEAT
TIMER ON OF F
FAN
HIGH
MED
LOW
=
TEMP Button
5
:
Press the button to increase the indoor temperature setting.
~
TEMP Button
∞
:
Press the button to decrease the indoor temperature setting.
!
LOCK Button:
Push this button to lock all the current settings, push again
to cancel the LOCK function.
Indicators on remote controller
Transmission Indicator
This transmission indicator lights when remote
controller transmits signals to the indoor unit.
Mode display
Displays the current operation mode. Including
AUTO, COOL, DRY, HEAT (Not applicable to
cooling only models), FAN and back to AUTO.
ON/OFF display
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Temp./Timer display
Displays the temperature setting (17 °C to 30 °C or
timer setting (0~24h). When you set the operat
-
ing mode to FAN ONLY, no temperature setting
is displayed.
TIMER display
This display area shows the settings of the
TIMER. That is, if only the starting time of opera
-
tion is set, it will display TIMER ON.
If only the turning o time of operation is set, it
will display TIMER OFF. If both operations are
set, it will show TIMER ON OFF which indicates
you have chosen to set both the starting time
and o time.
Fan speed display
Displays the selected fan speed: HIGH, MED,
LOW. Nothing displays when the operating mode
is either AUTO or DRY.
LOCK Indicator
LOCK display is displayed by pushing the LOCK
button. Push the LOCK button to clear display.
NOTE:
All signs shown in the Fig. is for the purpose of clear presentation.
But during the actual operation only the relative functional signs are shown
on the display panel.
3