2
TEMP Button
:
Push the TEMP button to decrease the indoor
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
MODE Select Button:
Each time you push the button, a mode is
selected in a sequence that goes from AUTO COOL DRY
HEAT and FAN as the following figure indicates:
、
、
、
SWING Button:
Push this switch button to change the louver
angle .
RESET Button:
When the RESET button is pushed, all of the current
settings are cancelled and the control will return to the initial settings.
NOTE:
HEAT only for Heat Pump
AUTO(COOL)
COOL
DRY
HEAT
FAN
LOCK Button:
Push this button to lock in all the current settings. To
release settings, push again.
CANCEL Button:
Push this button to cancel the TIMER settings.
TIMER Button:
This button is used to preset the time ON (start
to operate) and the time OFF (turn off the operation).
ON/OFF Button:
Push this button to start the unit operation. Push
the button again to stop the unit operation.
FAN SPEED Button:
This button is used for setting Fan Speed in
the sequence that goes from AUTO LOW
MED to HIGH, then
back to Auto.
、
、
TEMP Button
:
Push the button to increase the indoor temperature
setting or to adjust the TIMER in a clockwise direction.
VENT Button :
Push this button to set the ventilating mode. The
ventilating mode will operate in the following sequence :
Auto
Off
Continuous
Ventilation Function is available for the Fresh Star Series.
1
2
3
4
5
6
7
8
9
10
11
ECONOMIC RUNNING Button:
Push this button to go into the
Energy-Saving operation mode.
12
