York M36 Скачать руководство пользователя страница 13

Страница: 13 / 106

GLOBAL

INDUSTRIES, INC.

M36 - M48 Bucket Elevator

10230004

2015-08-31

Lockout

Make absolutely certain the power can’t

be supplied by any other means to

the

Bucket Elevator

All authorized personnel must put his/her

own personal lock on the switch to lock

it in the off position. Everyone must use

only his or her own personal key.

Nobody is to return power to

the

Bucket Elevator

until all work on

the

Bucket Elevator

has been completed

and, all locks have been removed.

Company management needs to look for

maintenance or other employees working on

the

equipment

without following the proper lockout

procedure. Management also needs to look for

any cover or guard not in its proper place. It is the

responsibility of everyone to report any missing

grates, guards, equipment failures, or failures to

lockout. Make certain no cover is removed unless

power is locked out.

FOLLOW A PROPER LOCKOUT

PROCEDURE

This suggested procedure must be performed

EVERY TIME

your

equipment

is to be worked

on. Stick with these steps and they will assist in

preventing accidents.

Shut down

the Bucket Elevator

in a

normal manner.

Shut off energy to

the Bucket Elevator

the main power source.

Turn the power switch back on

to confirm that power has been

deactivated.

Attempt to restart

the Bucket Elevator

guarantee the power is shut off and then

return the switch to the off position.

Using your own lock, lockout all (other)

energy sources which could provide any

power to

the Bucket Elevator

With your lock in place test the

disconnect to make certain the power

cannot be restored.

WARNING!

ALL INFORMATION ON

THIS PAGE

WARNING INFORMATION!

Safety

Содержание M36











































































































Результаты поиска

Содержание M36

Отзывы:

York M36, Руководство пользователя, Страница: 13 / 106

Результаты поиска

Содержание M36

Отзывы: