YORK
2
FORM YRK2-N1
ISSUE DATE: 03/18/2019
INSTALLATION
1. Layout the curb pieces as shown on Figure 1.
2. Install the 3/8" bolts on both ends of End Panel
(F) and Brace Panel (G) through the designated
holes in Side Panels (E). Make sure the corners
are flush and square as shown in Figure 1.
Place the curb in the proper location.
Make sure the curb section is “IN
SQUARE.”
3. Layout the curb pieces shown at the end of the
previous section.
4. Install the 3/8" bolts on both ends of Brace Panel
(G) through the designated holes on Side Panels
(E). Make sure the corners are flush and square
as shown on Figure 2.
Place the curb in the proper location.
Make sure the curb section is “IN
SQUARE.”
5. Layout the curb pieces as shown at the end of the
previous section.
6. Install the 3/8" bolts on both ends of Brace Panel
(G) through the designated holes in Side Panels
(E). Make sure the corners are flush and square as
shown in Figure 3.
Place the curb in the proper location.
Make sure the curb section is “IN
SQUARE.”
FIGURE 2 -
LD08550
E
G
E
M (2 TYP)
SAME PIECE SHOWN
IN NEXT FIGURE
FIGURE 3 -
LD08551
E
G
E
M (2 TYP)
SAME PIECE SHOWN
IN NEXT FIGURE
FIGURE 1 -
LD08549
RETURN OPENING
48 X 83
F
G
E
M (2 TYP)
SAME PIECE SHOWN
IN NEXT FIGURE
E