Ensure that the time and time zone are set
to correct.
PAL or NTSC are selected,
Talk volume of video doorbell can be adjusted
Video quality include HD, SD, LD for Playback
file in MicroSD
Time settings
Picture and sound
Firmware update:
Tap <Settings>enter “Settings”
Alarm settings
Please confirm whether update if there is new firmware.
Network settings:
Changing the connected network of doorbell.
Record settings
There are 3 modes of recording.
o
o
o
o
Buzzer: 1, 2,3 Minutes or off.
o Receive alarm prompt:
User will not receive call from visitor
,
Motion detection or PIR detection if disabled.
Alarm email: Setting the mail to receive the screenshot after alarm trigger.
Human infrared detection:
This is enabled by default, which PIR detects within 3 meters of doorbell
Motion detection:
Enable the motion detection, User can set the sensitivity of motion detection.
<
10
RTSP settings:
Setting the password when connecting to RTSP application.
o Record alarm
Alarm to be activated on PIR detection,
motion detection, tamper alarm, call.
Pre-record increase video recording by 10 seconds before alarm trigger.
o Record timer
Choose a period of time to record,
video files are saved in the SD card.
o Record manually
Start the recording when enabled, end the recording when disabled.
Tap Device ID will list Device ID, Device name,
Firmware version, LAN IP, Mac address.
5 Settings