YOODA 25TE Series Скачать руководство пользователя страница 5

Страница: 5 / 7

9. Regulation limit positions

12. Removing third limit position

11. Programming the third limit position

Press and hold

simultaneously

for 5 seconds UP

and DOWN buttons.

Using UP and DOWN

buttons set the

new limit position.

Blind will make short

up/down movements.

Motor will make several sounds.

We set the motor

in the upper or

lower limit position.

Press STOP button

5 times at 0.5 sec intervals

to conﬁrm the new

limit position.

Blind will make short

up/down movements.

Motor will make

several sounds.

10. Removing limit positions

Blind will make short

up/down movements.

Motor will make a sound.

Blind will make short

up/down movements.

Motor will make a sound.

Blind will make short

up/down movements.

Motor will make several sounds.

Limit positions

has been removed.

Press

programming

button P2.

Press

programming

button P2 again.

Press

DOWN button.

1. After setting the upper and lower limit positions, it is possible to set the third position (favorite) between those

positions.

2. Hold the STOP button for 3 seconds to set the blind in third limit position.

3. When the motor is in pulse mode, hold the STOP button for 3 seconds, blind reaches lower limit position, and then to

the set third position.

Blind will make short

up/down movements.

Motor will make a sound.

Blind will make short

up/down movements.

Motor will make several sounds.

Favourite position

has been programmed.

Press

STOP button.

Press

STOP button.

Blind will make short

up/down movements.

Motor will make a sound.

Blind will make short

up/down movements.

Motor will make a sound.

Blind will make short

up/down movements.

Motor will make several sounds.

Favourite position

has been removed.

Press

programming

button P2.

Press

STOP button.

Press

STOP button.

Blind will make short

up/down movements.

Motor will make a sound.

Upper limit position

has been set.

Lower limit position

has been set.

An example of the third

limit position

Set the blind

in favourite position.

Press

programming

button P2.

In case of setting the limit positions, the upper or lower limit position can be corrected.

Содержание 25TE Series








Результаты поиска

Содержание 25TE Series

Отзывы:

Бренды по названию

Популярные бренды

YOODA 25TE Series, Руководство пользователя

Результаты поиска

Содержание 25TE Series

Отзывы:

Бренды по названию

Популярные бренды