Yongnuo YN-E3-RT, Руководство пользователя

Страница: 18 / 72

M: Wireless Multiple Flash Shooting with Manual Flash Output
1.Set the flash mode to <M>.
2.Set the number of firing groups.
Ÿ
While
< >
is displayed
,
press
function button 2
< >
and set
the groups to fire
.
Ÿ
The setting changes as follows
each time you press the button
:
ALL( RATIO OFF )
→
A
/
B( RATIO A
:
B )
→
A
/
B
/
C( RATIO A
:
B
:
C )
3
.
Select a firing group
.
Ÿ
Press function button 3< >,
Ÿ
turn
< >
and select the group for
which you want to set the flash
output.
4
.
Set the flash output.
Ÿ
Press function button3
< >.
Ÿ
Turn
< >
to set the flash output
,
and press the
< >
button.
Ÿ
Repeat steps 3 and 4 to set the
flash output of all groups.
5
.
Take the picture.
Ÿ
Each group fires at the set flash
output.
This describes wireless (multiple flash) shooting using manual
flash.You can shoot with a different flash output setting for each
slave unit(firing group). Set all
parameters on the master unit.
/
+ -
15
Ÿ
When ALL <RATIO OFF> is set, set A, B or C as the firing group
for the slave units. The flash will not fire if it is set to D or E.
Ÿ
To fire multiple slave units with the same flash output, select
ALL <RATIO OFF> in step 2.