Yongnuo YN-622N, Руководство пользователя, Страница: 19 / 22

Ÿ
Factory Reset
1 .) Hold down 【 】+【 GP / MODE 】
button at the same time .
2 .) The indicator light will light up in
sequence from A → B → C → C1 → C2 →
C3 → state indicator ( red) .
3 .) Loose all the buttons will restore
factory reset .
17
5. The single contact camera / flash : Manually
setting the flash output
1) . Transmitting group setting: According to the
transmitter group setting method 2 ( P9 ).
2) . Flash mode setting ( on the flash ): Set to manual
flash mode, use the transmitter's main flash trigger
contact; but it does not support high synchronous
s p e e d o r o t h e r T T L f u n c t i o n ( t h e m a x i m u m
synchronous speed is 1 / 250s or less).
Usage
Ÿ
About the Max Sync Speed
Ÿ
About Automatic Saving Function
It needs the camera and flash both support hi-speed
sync, and the max sync speed is 1/8000s or 1/4000s.
When using the hot shoe flash which doesn’t support
hi-speed sync, the max sync speed is 1/250s or lower.
The transceiver will auto saving the sets such as
channel, receiving group, AF assist beam. The
exposure
compensation and flash output will not be saved.