If you don't have much time to read the whole user manual, we advise you to read this
section.
1.Please avoid the excessive use of the output with maximum power. It can effectively extend
the service life of this product. (It is recommended that the speedlite should be idle for more
than 10 minutes when entering the overheat protection).
2.Short press
[ ]
to switch to various trigger modes, including on-camera/radio transmission
master control/radio transmission slave /optical transmission slave (S1 or S2)mode,in the mode of
radio transmission mode, long press this button for channel setting.
3.Press
[
MODE
]
to set flash mode:M/MULTI
4.In the master control mode of radio transmission, press
[ ]
to switch to various groups,the
setting of master unit setting is the same as that of group A .
5.Short press function button
[
]
to enter focal length settings, flash frequency and flash times
settings in the stroboscopic mode. Long press this button to turn on/off sound prompt.
6.According to the wireless flash trigger model used,user can set the radio signal at RF603 or RF602
through the custom functions setting.
7.Press
[
MODE
]
and
[ ]
and hold together to restore the setting of flash shooting and wireless
shooting to default regular on-camera mode.
Quick Start
-3-
