V1.2
13
same. Therefore, different parts of the measurement results should not be used to compare with
each other. In physical health, multi test several times, prior to know their "normal temperature".
NOTE: Product measurement data are used only as an aid to diagnosis.
6 Maintenance and Attention
●The probe of the Infrared thermometer is one of the most important parts , the front probe is
most vulnerable. So be careful when using the measurement, avoid damaging the probe.
●Please wipe the LCD screen and the shell is gently with clean soft cloth;
●Please place the Infrared thermometer in a cool and dry place, avoid direct sunlight;
● If a period of time not plan to use it,please cover the cap and remove the battery;
●Please click the following ways to clean the probe:
●
Cleaning frequency:
When using at home, clean once before each use, clean once after each use.
Used in medical institutions, when measuring forehead temperature, non-contact conditions, the
doctor according to the necessary situation about 10 times to clean once.
When measuring ear temperature in medical institutions, disposable ear temperature sleeve is
recommended
●
Cleaning method:
use 75% alcohol cotton wet cloth to clean the infrared thermometer shell and temperature head,
and then dry with a dry soft cotton cloth.
If encounter has unfavorable clean dirt, can stick on soft cotton cloth water or neutral detergent
wipe, reoccupy dry cloth wipe.
●
Precautions:
Never clean with abrasive cleaners, thinners or gasoline.
Never immerse the instrument in water or other liquids
Be careful not to scratch yourself.
●The packaging products should be stored in a temperature of - 20
℃
- 55
℃
, relative humidity is
15%
～
93% , non corrosive gases and well ventilated room.
●For a long time (more than 3 months) is not in use, please remove the battery storage. In addition
into the battery is not used for a long time, may be due to battery leakage caused by fault;
●The treatment of waste batteries according to the city of relevant environmental protection
regulations for processing;
●If you need maintenance, please contact the manufacturer
● If you don't comply with the above note matters
and other proper use and lead to machine failure, the company does not assume responsibility for
the quality.
•Do not repair or maintain during use.
•If you think the device is damaged or abnormal, please stop using the device. Please contact the
manufacturer. It is strictly forbidden for the user to dismantle or repair by himself.
